3D printed airbox for Piaggio Maxi engines 125/180cc.
With this box, we can offer you a plug-and-play solution. The rear part of the airbox is replaced, eliminating the need for conversion.
All advantages at a glance:
- Original appearance
- No complex modification of the original box necessary
- Very high air flow rate
The angle of the intake manifold has been changed to achieve the straightest possible path to the airbox.
A special intake manifold is included, which can be used with the Malossi/Polini 360° intake manifold plate.
If this is not available, the ‘3D printed plate’ variant is required.
The original cover and seal of the Runner airbox continue to be used.
Our tests have shown that modifying the cover does not improve performance.
Scope of delivery:
- 3D printed airbox
- Screws for assembly
- 2x hose clamps
- Intake manifold (with 3D printed plate for the ‘3D printed plate’ option)
- Filter clip
The original airbox seal can still be used.
In our shop, you will find the matching carburettor from Nibbi, with vacuum and oil connection.
Recommendation from JD-Performance:
Main jet: 132-148
Secondary jet: 42-45
Needle: 4th position from the top
The settings vary depending on the setup and are only a rough guide.
You can also find suitable jet sets in our shop.
What do you need to do when you receive the airbox?
- Remove the original airbox
- Remove the carburettor and intake manifold (if these are no longer to be used, suitable manifolds will follow)
- Mount the original airbox cover on the 3D-printed box (don't forget the seal)
- Fit the intake manifold supplied
- Fit the carburettor as recommended (start with a large one)
- Connect the oil and vacuum hoses (make sure the oil hose is filled)
- Fit the airbox
- Adjust the carburettor
Note: the line on the connecting hose and airbox must match (see image)
Please note! The filter mat is for illustration purposes only and is not included in the scope of delivery!
We recommend a Malossi or Polini filter mat, which should be moistened with air filter spray to bind fine particles to the filter.
